PRICES include / exclude VAT
Homepage>CSN EN 14792 - Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
Sponsored link
Released: 2017
CSN EN 14792 - Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence

CSN EN 14792

Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence

CURRENCY
LANGUAGE
English
French
Number of Standard:CSN EN 14792
Category:834722
Released:2017
DESCRIPTION

EN 14792


EN 14792 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence - This European Standard specifies the standard reference method (SRM) based on the chemiluminescence principle for the determination of the nitrogen oxides (NOx) in flue gases emitted to the atmosphere from ducts and stacks. It includes the sampling and the gas conditioning system, as well as the analyser. This European Standard specifies the characteristics to be determined and the performance criteria to be fulfilled by measuring systems based on this measurement method. It applies for periodic monitoring and for the calibration or control of automatic measuring systems (AMS) permanently installed on a stack, for regulatory or other purposes. This European Standard specifies criteria for demonstration of equivalence of an alternative method to the SRM by application of prEN 14793. This European standard has been validated during field tests on waste incineration, co-incineration and large combustion installations and on a recognized test-bench. It has been validated for sampling periods of 30 min in the range of 0 mg/m3 to 1 300 mg/m3 of NO2 for large combustion plants and 0 mg/m3 to 400 mg/m3 of NO2 for waste incineration, according to emission limit values (ELV) laid down in the Directive 2010/75/EC. The ELV for NOx (NO + NO2) in EU directives are expressed in mg/m3 of NO2 on a dry basis, at a specified value for oxygen and at reference conditions (273 K and 101,3 kPa). NOTE The characteristics of installations, the conditions during field tests and the values of repeatability and reproducibility in the field are given in Annex F.

Original English text of CSN EN Standard.
The price of the Standard included all amendments and correcturs.